【官方開箱介紹】 POSE+ Metal series: Revenge of Cronos Baikanfu《天威勇士 倍功夫》

[Official Unboxing] POSE+ Metal series: Revenge of Cronos Baikanfu

The fitting explanation animation of "P+04 P+04 バイカンフー" is fully released!

**********

**********

バイカンフーを向徴するロム・ストール、ケンリュウ、バイカンフーのActiveと3 Body fit.
バイカンフーへのアツい思いを込めてどちらもパッケージの上paperShi立てにしました!

パッケージの上を开けると number 々の中のアニメシーンが in the play!

The inside of the box is made of かしくノスタルジックなスタイル.
アイコンのウルフマークと公に3 体が见えます!

さあ!パイルフォーメーションーーー! ! !
(ええっ?!そんなすぐに?!)

パイルフォーメーション用のジョイントパーツを用すれば、
ロム・ストール、ケンリュウ、バイカンフーの3 体を简単にfitすることが出ます.

The famous character in the play, Sugaru P+04 Haikoru, reappears! Right and wrong.



では、それぞれのフィギュアを introduction します!

ロム・ストールの全パーツ. Various types of movable areas are included.
ロム・ストールは両手で剣wolf(小)をholdちstructureえる事が出ます.
デフォルトのfitting attaches great importance to the lower body でさえも见栄えの好いポージングがpossible.

The figure with emphasis on the lower body (left) is 80mm tall. The figure with emphasis on the lower body (right) is 75mm tall.

"Your name is the name of your name!"
It is possible to reproduce the 両手を chestの前に合わせるポージングも.

"Sky Cosmic Heart Fist!! Whirlwind Kick!!"

『ガルディ哥さん… 俺はどうすればいいんだ、哥さん!
The true meaning of the sky! Two swords and one edge! ! Destiny is broken! ! ! 』

"Wolf!" !パイルフォーメーション! ! ! 』

The hole in the back is used for the commercially available 3mm diameter のスタンドをすれば,
It is possible to reproduce the パイルフォーメーションのに空に向かって飞ぶシーンを.
(スタンドはproductsにはaffiliatedしていません)

パイルフォーメーション (fitting) シーンをReappearance of the occasionは、It is necessary to obtain the instruction manual in advanceをよくんで、

して行ってください.
Take the instruction manual and record it.
ぜひごutilize ください.

"Enter the Messenger of the Sky, Kirin! ! ! 』

Overall height 165mm. Use wide range of movable joints.
The さらにのashiri part of the の slippery めのテープにより and the pulsing なポージングが can be reproduced!

The wolf (middle), the shield of justice, and the パイルガードを equipment.
パイルガードは縦 to きlateral きとfree にセットpossible.

ロムと同じように, back in the hole があり, market vendor の diameter 3mmのスタンドを use すれば,
Aerial シーンのポージングで display is possible. (スタンドはproductsにはaffiliatedしていません)

"Heaven and earth, fire and water, my power and my power...!" ! 』

パイルフォーメーション(fitting)をReproduction of the occasion, must be done in advance Instructions for the instructions are as follows:
Take the instruction manual and record it.
ぜひごutilize ください.

『バイ、カンフー! ! 』

Overall height 320mm. 1/6 サイズ, 12 インチアクションフィギュアらしいビッグサイズ!
The first 3-axis ジョイント mechanism により, the real upper and lower movable movable parts are possible.
It's possible to reappear the drama's のあらゆるアングルのバイカンフーも!

3-body fit, natural fit and natural fit are reproduced!
It is possible to reproduce the 5-finger fully movable knuckles and the attached facial expressions.

"Sky Cosmic Heart Fist - Summon Thunder!"

ケンリュウと同じように、Attributed to the ashiri part of the の slippery stop めのテープにより、
It's possible to reappear the pulsing Nanako!

"Sky Sky Heart Fist - Tangzhu Cutting!" ! 』

「POSE+メタルシリーズバイカンフー」はまもなく store head 発磲!
It's good to be happy and willing to be happy!

※Image and product are made by Samurai.実记のproducts and occasions are different.
※Please refer to the following page for details on the fitting instructions and animation instructions.

【Product Specification】ノンスケール-- Finished product made of ダイキャスト painted


【Product サイズ】バイカンフーThe total height is about 330mm/ケンリュウThe total height is about 165mm/ロム・ストール--The total height is about 75mm


【Material】ダイキャスト, ABS, PVC, POM


【セットContents】
■ バイカンフー、ケンリュウ、ロム・ストール main body
■ Sword Wolf (large), Sword Wolf (medium), Sword Wolf (small), Meteor
■ パイルガード, fate両severing sword with ジョイント
■ パイルフォーメーションジョイント
■ Exclusive application
■ バイカンフーツノ for exchange
■ Hakuba has a five-finger movable hand (right and left) and a holding hand (right and left)
■ケンリュウ uses the open hand (right and left), the holding hand (right and left), and the holding hand (right and left)
■ ロム・ストール focuses on the lower body through modeling, マスクオフヘッド, pointing hand (right), opening hand (right and left), holding hand (right and left),
Holding hands (right and left)


[Predetermined date of release] Late December 2020

©PLEX/ MachineRobo Partner

Back to blog